Minicom Advanced Systems Smart CAT5 - Manual (Page 17)

USER GUIDE
16
Figure 14 Settings window
Note! When the OSD is password protected (explained below) only the Administrator
has access to the F2 settings window.
4.2.4 The General settings
With the GENERAL line highlighted, press Enter. The General settings window
appears see Figure 15.
Figure 15 General Settings window
From this window you can do the following:
4.2.4.1 Security
The OSD comes with an advanced password security system that contains 3 different
security levels. Each security level has different access rights to the system.
These levels are as follows: