Miele K1911SF - Manual (Page 24)

To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
Non-abrasive cleaning agents are
also unsuitable, as they can cause
matte areas to appear.
Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner (available
from Miele).
Only use a mild solution of warm
water and liquid dish soap to clean
this appliance.
Do not use a steam cleaner to clean
this appliance. Pressurized steam
could penetrate electrical
components and cause a short
circuit.
Do not allow water to get into the
electronic unit or lights.
Before cleaning
^ Use the main switch to turn the
appliance off completely.
The main switch is located on the
right-side underneath the control panel.
^ Unplug the power cord.
^ Remove any food from the appliance
and store it in a cool place.
^ Take out any removable parts,
e.g., shelves.
Cleaning the interior and
accessories
Use a mild solution of warm water and
liquid dish soap. Wash all accessories
and drawers by hand. Do not wash in a
dishwasher.
^ Clean the appliance as needed.
^ After washing, wipe down the interior
and accessories with a clean wet
cloth, then dry with a soft cloth. Leave
the appliance door open for a short
time, so the moisture can evaporate.
Appliance door
^ Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner.
^ To help prevent resoiling, a
conditioner for stainless steel can
also be used. Apply sparingly with
even pressure.
Cleaning and care
24