Aligning the appliance 48, Installing the appliance, Aligning the appliance – Miele K1911SF User Manual
Page 48
Aligning the appliance
^ Align the appliance with the custom
front.
The height-adjustable feet at the front
and rear can all be adjusted from the
front.
– Front: with an open-ended wrench
½" (SW 13).
The feet can be adjusted from the
top and bottom
e.
– Rear: with a
5
/
16
" (8 mm) hex nut
driver via flexible shaft
f.
A mark is located on the appliance
base and is used as a standard gauge
for height adjustment. When adjusting
the height, align this mark at 1
1
/
4
"
(32 mm) above the floor.
^ Unscrew the height-adjustable feet
until the mark on the base has
reached the indicated guide
dimension 1
1
/
4
" (32 mm).
It is very important to comply with
this dimension for the subsequent
alignment of the custom door fronts.
^ Align the custom door with a level.
Installing the appliance
48