Miele K1911SF - Manual (Page 9)

Before using for the first time
The stainless steel surface of the
appliance is protected with a plastic
film, which protects it during shipping.
Do not remove this protective film until
the appliance has been completely
installed.
After removing the protective film clean
the exterior surface with the supplied
stainless steel agent. This will aid in
preventing resoiling.
^ Clean the inside of the appliance and
the accessories with a mild solution
of warm water and liquid dish soap.
Dry with a soft cloth.
After installing the appliance, wait at
least 30 minutes before switching on
the appliance. During transport,
fluids in the refrigeration system may
have shifted, and will need some
time to settle.
Turning the appliance On/Off
^ Open the appliance door.
^ Turn the appliance On/Off with the
main switch.
The main switch is located on the
right-side underneath the control panel.
All zones are switched on or off
together.
Once on, the appliance begins cooling.
When the door is open, the interior
lights come on.
The access button will light in the
control panel.
The preset temperatures (factory
settings) are reached after a few hours.
Do not put any food in the appliance
until the preset temperatures are
reached.
,
Switching the appliance off with
the main switch does not safely
isolate it from the power supply.
Before use
9