Mercedes-Benz 2005 C 230 Kompressor - Manual (Page 390)

389
Practical hints
Replacing bulbs
Left headlamp, mirror-image of right
headlamp
1 Housing cover for Bi-Xenon headlamp
2 Housing cover for high beam flasher,
parking and standing lamp
3 Bulb socket for turn signal lamp
4 Bulb holder for high beam flasher
5 Bulb socket for parking and standing
lamp bulb
High beam bulb for high beam flasher
̈ Turn housing cover 2 counterclock-
wise and remove it.
̈ Turn bulb holder 4 with the bulb coun-
terclockwise and remove it.
̈ Pull the bulb at its socket out of bulb
holder
4.
̈ Insert the new bulb so that its socket
locates in the recess of bulb holder
4
and is level to it.
̈ Reinsert bulb holder 4 with the bulb in
the lamp and turn clockwise.
̈ Align housing cover 2 and turn it
clockwise.
Front turn signal lamp bulb
̈ Turn bulb socket 3 with the bulb
counterclockwise and remove it.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket
3.
̈ Press the new bulb gently into bulb
socket
3 and turn clockwise until it
engages.
̈ Place bulb socket 3 back into the
lamp and turn it clockwise.