Mio A201 - Manual (Page 106)

98
7.2 Restoring Last State
Follow this procedure to restore your Pocket PC to the last state when your
Pocket PC does not respond after being reset.
1. Disconnect all cables, including the AC adapter, from your Pocket PC.
2. Remove the battery cover and the battery.
3. Slide the ON/OFF switch to the OFF (right) position.
4. Wait for 1 minute and then slide the switch back to the ON (left) position.
5. Replace the battery and its cover.
NOTE: You need to restore your Pocket PC to factory default state if you have set up a
password but forget it. Restoring factory default state means all data you have entered in
RAM, including all files, system settings, and additional programs you have installed, will
be erased. Ask an authorized service personnel for help if you need to restore your Pocket
PC to factory default state.
Wait for 1 minute .