Mio A201 User Manual
Page 111
103
Make sure that you have installed the proper drivers for your Pocket PC.
In the properties for your network card, make sure that you have correctly
configured the IP settings, and the addresses of your DNS servers and/or
WINS servers. Your network administrator can verify this.
Make sure that you have added necessary server information.
If
Network Connection
is not listed as a connection method in the ActiveSync
dialog box when starting synchronization, wait a few minutes and try again.
Also, if synchronization does not start right away, the network is probably
busy, and it may take a minute for your Pocket PC to connect to the
network.
Verify with your network administrator that your user name and password
are correct.
Verify with your network administrator that the network you are trying to
connect to is available, to try to connect to it from another computer.
You may need to change the device name if you are trying to connect to a
network and cannot because another device with the same name is already
connected. To change the device name, tap
Settings
System
About
Device ID
.