Mio A201 - Manual (Page 72)

64
5.8 Additional Programs
In addition to Microsoft software, your Pocket PC manufacturer may provide
additional programs to enhance your Pocket PC or facilitate your operation.
NOTE: Depending on the continuing developments of the product, the software supplied
with your Pocket PC may be changed or updated. If there is any difference between the
information in this manual and your product, the operation should be based on the product
you have.
Dialer
The Dialer program allows you to use your Pocket PC as a hands-free device for
a Bluetooth-enabled mobile phone. You can tap your Pocket PC to place and
receive calls instead of pressing the phone’s keypad.
Connecting a Bluetooth Mobile Phone
NOTE: For faster connection, you can pair your Pocket PC and mobile phone before using
the Dialer program. (See “Using a Voice Gateway” in section 6.3 for instructions.)
1. Tap
Programs Dialer to switch to the program.
2. By default, your Pocket PC will switch to Pair
Mode and wait for the pairing action from your
mobile phone for 60 seconds. The connection will
be established as long as you initiate the pairing
process on your mobile phone within this period.
Your Pocket PC will also connect the Bluetooth
headset service, if available.
3. You will see the Dialer main screen after the
pairing is completed. The status bar at the bottom
shows the name of the mobile phone connected.
When you next run the Dialer program, your Pocket PC will automatically pair
with the available one of the last connected mobile phones.