Moxa Technologies NPort 5600 - Manual (Page 34)

NPort 5600 Series User’s Manual Configuring NPort Administrator
5-4
Server name
Setting Factory Default Necessity
1 to 39 characters NP[model name]-[Port No.]_ [Serial No.] Optional
This option is useful for specifying the location or application of different NPorts.
Time
NPort 5600 has a built-in Real-Time Clock for time calibration functions. Functions such as Auto
warning “Email” or “SNMP Trap” can add real-time information to the message.
ATTENTION
First time users should select the time zone first. The Console will display the “real time”
according to the time zone compared to GMT.
If you would like to modify the real time clock, select “Local time.” NPort’s firmware will
modify the GMT time according to the Time Zone.
Time zone
Setting Factory Default Necessity
User selectable time zone GMT (Greenwich Mean Time) Optional
Local time
Setting Factory Default Necessity
User adjustable time.
(1900/1/1-2037/12/31)
GMT (Greenwich Mean Time) Optional
Click the Modify button to open the Modify time settings window to input the correct local time.
Time server
Setting Factory Default Necessity
IP or Domain address
(E.g., 192.168.1.1 or time.stdtime.gov.tw)
None Optional
NPort 5600 uses SNTP (RFC-2030) for auto time calibration.
Input the correct “Time server” IP address or domain address. Once NPort is configured with the
correct Time Server address, NPort will request time information from the “Time server” every 10
minutes.