Minolta PagePro 1100 - Manual (Page 40)

2-14
Setting-Up
Ch
apte
r
2
S
e
tti
ng
-U
p
Turning on the Printer
■ After connecting the printer to a power outlet, press the power
switch to turn it on.
Turning on the printer causes all the indicators on the control panel
to light, which indicates that the printer is warming up. In about 23
seconds or less, only the Ready indicator remains lit, indicating that
the printer is ready to print.
Note
◆ The printer automatically enters a power saving mode after a set
period of time in which it does not receive a print command from the
computer. The default setting is 15 minutes, however, the time period
can be changed using the control panel (see “Using the Control
Panel” on page 5-6). Whenever the printer receives a print command
while in the power saving mode, it will automatically start to warm
up before printing.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500