Minolta PagePro 1100 - Manual (Page 73)

3-17
Chap
ter
3
U
s
in
g t
h
e P
rin
te
r
Selecting Output Direction (Printed Side Up or Down)
Selecting Output Direction (Printed Side
Up or Down)
The optional face-up tray, as explained earlier in this section is a use-
ful tool for printing on thick paper or envelopes printed side up. The
factory default for the output tray however, is the face-down tray
(printed side down). In this mode, the output tray receives the printed
documents in order.
This setting is controlled by a switch which is located on the right side
of the printer toward the rear.
a. When the switch is flush with the top of the printer, prints are output
printed side down (factory default).
b. When the switch is pressed in, prints are output printed side up.
Face-up tray (option)
Face-down tray
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500