Multi-Tech Systems MT5600DSVD - Manual (Page 21)

MultiModemDSVD User Guide 3 Operation
16
• POP server address
• Mail or SMTP address
• News or NNT server address
Dial-Up Networking
Whether you use the Internet for e-mail or for browsing the Web, to connect to it
through your modem, you must first set up a remote-node client program. The one
in Windows 95, 98, Me, NT 4.0, and 2000 is called Dial-Up Networking. Dial-Up
Networking establishes your connection to the ISP’s server, which is the shared com-
puter that manages calls from clients (your computer) to the Internet. Most, if not all,
Windows browsers start Dial-Up Networking automatically when you open them.
Dial-Up Networking in Windows 95/98
To install and run Dial-Up Networking in Windows 95 or 98
Install a NetWare client or Client for Microsoft Networks on the client computer.
Microsoft Client for Netware Networks, Microsoft Client for Microsoft Networks,
and two Novell Netware clients are included with Windows 95/98.
1. Insert the Windows compact disc into the CD-ROM drive.
2. In Windows, click the Start button, and then select Settings, Control Panel, and
Add/Remove Programs.
3. Click the Windows Setup tab.
4. Check Communications in the Components list.
5. Click the Details button.
6. Check Dial-up Networking in the Components list.
7. Click OK. Dial-Up Networking is installed from the Windows compact disc.
8. When the installation is complete, reboot the computer.
To create a connection entry
1. Double-click the My Computer icon.
2. Double-click the Dial-Up Networking icon.
3. Double-click the Make New Connection icon, and follow the directions in the
wizard to create a connection entry.
To dial your Internet access provider
1. Double-click the My Computer icon.
2. Double-click the Dial-Up Networking icon.
3. Double-click the icon with your ISP’s name.
4. Type your name and password if they are not already entered.
5. Click Connect.