Multi-Tech Systems MT5600DSVD - Manual (Page 22)

MultiModemDSVD User Guide 3 Operation
17
6. Follow the instructions provided by your ISP for browsing the the Internet,
reading e-mail, and accessing information.
For further information on Dial-Up Networking or Microsoft Client for NetWare
Networks, see Windows Help.
Dial-Up Networking in Windows Me
To install Dial-Up Networking
Dial-Up Networking is automatically installed with Windows Me.
To create a connection entry
1. Click Start, point to Programs, point to Accessories, point to Communications,
and then click Internet Connection Wizard.
2. Click I want to sign up for a new Internet account, and then click Next.
3. Follow the instructions for setting up your dial-up properties and detecting your
modem.
To dial your Internet access provider
1. Click Start, point to Settings, and then click Control Panel.
2. Double-click the Dial-Up Networking icon.
3. Double-click the icon with your ISP’s name.
4. Follow the instructions provided by your ISP for browsing the the Internet,
reading e-mail, and accessing information.
For further information on Dial-Up Networking, see Windows Me Help.
Dial-Up Networking in Windows NT 4.0
To install Dial-Up Networking
1. Double-click the My Computer icon, and then double-click the Dial-Up Net-
working icon. If Dial-Up Networking is not installed, you will see an Install
button in the Dial-Up Networking dialog box.
2. Insert the Windows NT 4.0 compact disc into the CD-ROM drive.
3. Click Install in the Dial-Up Networking dialog box.
4. In the Add RAS Device dialog box, choose the modem to use with Dial-Up Net-
working , and then click OK.
5. In the Remote Access Setup dialog box, click Configure.
6. In the Configure Port Usage dialog box, click Dial out only, and then click OK.
7. In the Remote Access Setup dialog box, click Network.
8. In the Network Configuration dialog box, make sure that only TCP/IP is select-
ed, and then click OK.
9. If there is a network interface card that does not have TCP/IP bound to it, the
Microsoft TCP/IP Properties window appears. Click Cancel to close the window.