Siemens ST60 - Manual (Page 57)

Settings
57
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
©
Siem
ens A
G
2001
, I
:\Mob
il\ST60
\r
et
ai
l\en\_
von_itl\S
T60_Retail_EN_0
31209\S
T60_sett
ing
s.f
m
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Network
C
M SettingsMNetwork
M Select function.
Line
To use this function, two separate
phone numbers must be registered
on the phone.
Select line
Select the currently used phone
number.
Display the active line:
Block line
(Phone-code protected)
You may limit usage to one phone
number.
Configuration
Network info
The list of GSM networks currently
available is displayed.
Choose network
Network search is restarted. This is
useful if you are not on your home
network or want to register on a dif-
ferent network. The network list is
rebuilt when Auto network is set.
Auto network
If
Auto network is activated, the next
network is dialled in the order of
your Pref. network . Otherwise a differ-
ent network can be selected manu-
ally from the list of the available GSM
networks.
Pref. network
Enter your preferred service provid-
ers here for when you leave your
home network (e.g. if there are dif-
ferences in price).
L
L
Additional information
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.