Motorola D200 - Manual (Page 17)

15
English
3. Press or to select " DIAL MODE" and press .
4. Press or to select " TONE" or "PULSE" and press .
Registering a new handset
When you register a new handset to your base, you will be
asked to enter the base PIN code.
The pre-set PIN code is 0000. If you wish to change this code,
see page 15.
Each handset can only be registered to one base at a time.
Before registering, make sure the new handset is fully charged
and that you have the base and handset in front of you.
On the handset you want to register:
1. Press to access the main menu.
2. Press or to select " REGISTRATION" and press .
3. Press or to select your base number.
On your base:
4. Press and hold
until you hear the registration tone. You
are now in 'subscription mode'.
If the base already has the maximum number of handsets (5)
registered to it, you will hear the reject tone and you will need
to de-register one of the existing handsets before you can
register the new handset.
See the next section for de-registering handsets.
On the handset you want to register:
5. Press .
6. Enter the base PIN code. The pre-set base PIN code is 0000.
7. Press .
You will hear a confirmation tone when registration is
complete.
When in standby mode, the new handset number will be
displayed.
The handset will automatically be allocated with the next
available handset number.
If the registration fails, the handset display returns to the
display of before the registration.
De-register a handset
If you have more than one handset registered to your base,
you can de-register a handset.
Before de-registering, make sure all handsets and the base are
in standby mode.
1. On a handset not to be de-registered, press to
access the main menu.
2. Press or until " BS SETTINGS" is displayed and press
.
3. Press or to display " TERMINATE HS" and press .
4. "PIN ?" is displayed. Enter your PIN code and press .
5. Press or to display the handset you want to de-register
and press .
If the handset has been de-registered from the base
successfully, you will hear a confirmation tone.
Base PIN code
You need to enter the base PIN code when you are registering
handsets. For security reasons you may wish to change the PIN
code. You can choose a PIN code up to 4 digits long. If you reset
the base from the handset, the base PIN code will be 0000.
Allegro_CID.book Page 15 Tuesday, January 15, 2008 3:07 PM