Motorola D200 - Manual (Page 18)

16
English
Always keep a record of your base PIN code. Note your PIN code
and keep it in a safe place. If you change the PIN code you will
need to use the new code for any handset registered to your base.
1. Press to access the main menu.
2. Press or to select " BS SETTINGS" and press .
3. Press or to select " MODIFY PIN" and press .
4. Enter the current PIN code using the number keypad
.
5. " NEW PIN" appears. Enter a new PIN code and press .
6. " CONFIRM ?" appears. Re enter new PIN code. Press .
Selecting a base
You can register a handset to up to 4 bases, e.g. one at work
and one at home, and switch between them. Once your
handset is registered with other bases, you can specify the
base you want to use.
1. Press to access the main menu.
2. Press or to select " HS SETTINGS". Press .
3. Press or to select " SELECT BASE". Press .
4. Press or to select the base number.
Press .
Resetting your phone
If you reset your phone, both the base and handset will return
to their pre-set (default) settings. If you have more than one
handset registered to your base and you complete the
following procedure, only the handset you reset and the base
will go back to the default settings.
For the base:
1. Press to access the main menu.
2. Press or to select " BS SETTINGS" and press .
3. Press or to select " BS DEFAULT" and press .
4. "
PIN ?" appears. Enter your PIN code. Press
.
The base will reset and the handset will return to standby
mode.
For the handset:
1. Press to access the main menu.
2. Press or to select " HS SETTINGS" and press .
3. Press or to select " HS DEFAULT" and press .
4. " PIN ?" appears. Enter your PIN code. Press .
The handset will reset and the handset will beep.
10. Default settings
Ringer Volume 2
Earpiece Volume 3
Speaker Volume 3
Base Ringer Type 1
Internal/External
Ringer Type
1
Alarm OFF
Tone Key
Tone ON
Battery Low ON
Range Alarm ON
Allegro_CID.book Page 16 Tuesday, January 15, 2008 3:07 PM