Motorola D200 - Manual (Page 21)

19
English
If you already have 5 handsets registered to your base and you
want to register a new handset, you will first need to de-
register one of your existing handsets, see 'De-registering a
handset', page 15.
With more than one handset you can make internal calls,
transfer calls and hold conference calls.
Register your handset to another base
Follow the procedure for registering shown in the other
manufacturer's user guide.
Call another handset (internal call)
1. Press . The symbol and are displayed and
you will hear the internal call dialling tone.
2. Enter the number of the handset you want to call using the
number keypad.
Answer an external call while on an internal call
During an internal call, if an external caller is trying to get
through, you will hear a series of short beeps to alert you to the
call.
If you have caller ID, the caller's information will also be
displayed.
1. To end the internal call, press .
2. Press to take the external call.
Transferring a call
You can transfer an external caller from your handset to
another internal handset.
During an external call:
1. Press
. The external caller is put on-hold.
2. Enter the number of the handset you want to have a
conference call with using the number keypad.
3. When the called handset answers, press or place the
handset backs on the base to transfer the call.
If the called handset does not answer, press to return to
the external caller.
Conference call
You can hold a 3-way conversation (conference call) between
your handset, an external caller and another internal handset
user.
During an external call:
1. Press
. The external caller is put on-hold.
2. Enter the number of the handset you want to have a
conference call with using the number keypad. The called
handset will ring.
3. When the called handset answers, press on the
initiating handset to start your conference call.
4. Any handset can press at any time to leave the
conference call.
13. Simple solutions
The most common problems often have the simplest
solutions. We hope that you will not experience any problems
with your product, but in the event that you do, this section
hopes to overcome any problems quickly and with minimum
effort.
Firstly, check that:
• the telephone line cord is correctly connected.
• the mains power cord is correctly connected and switched
on.
• the batteries is charged and not in need of replacing.
Allegro_CID.book Page 19 Tuesday, January 15, 2008 3:07 PM