McIntosh C2200 - Manual (Page 26)

26
Specifications
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
Total Harmonic Distortion
0.08% from 20Hz to 20,000Hz
Signal To Noise Ratio
Phono, 80dB
High Level, 93dB
Maximum Voltage Output
8Vrms Unbalanced, 16Vrms Balanced
Output Impedance
250 ohms Unbalanced, 500 ohms Balanced
Sensitivity
Phono MM, 4.4mV for 2.5V rated output
High Level, 450mV for 2.5V rated output
Input Impedance
Phono MM, 47K ohms, 65pF
High Level, 22K Unbalanced, 44K Balanced
Maximum Input Signal
Phono MM, 50mV @ 1,000Hz
High Level, 5V Unbalanced, 10V Balanced
Power Requirements
100 Volts, 50/60Hz at 75 watts
110 Volts, 50/60Hz at 75 watts
120 Volts, 50/60Hz at 75 watts
220 Volts, 50/60Hz at 75 watts
230 Volts, 50/60Hz at 75 watts
240 Volts, 50/60Hz at 75 watts
Note: Refer to the rear panel of the C2200 for the correct
voltage.
Specifications
Tube Compliment
Phono Circuitry:
2 - 12AX7A
2 - 12AT7A
High Level Circuitry:
2 - 12AX7A
2 - 12AT7A
Overall Dimensions
17-1/2 inches (44.5cm) W, 7-5/8 inches (19.37cm) H, 20
inches (50.8cm) D (including clearance for connectors)
Weight
26.75 pounds (12.14 kg) net, 47.75 pounds (21.67 kg) in
shipping carton