Charge battery, Getting started – Siemens ST55 User Manual

Page 10

Advertising
background image

Getting started

9

ST55 en retail, A31008-H6850-A101-1-7619 (8. August 2003, 14:18)

©

Siem

ens AG 2001

, I

:\Mob

il\ST5

5\ST5

5_retail\en\_v

on_ok\ST55_startup.fm

Charge battery

The battery is not fully charged

when delivered. Plug charger cable

into the bottom of the phone

n

,

plug the charger cable into a mains

power socket and charge for at least

2.5 hours

.

To remove, push the buttons on the

side of the connector in the direction

of the arrows

o

.

Charging time
An empty battery is fully charged

after about 2.5 hours. Charging is

only possible within a temperature

range of +5 °C to +40 °C. The mains

voltage specified on the power

supply unit must not be exceeded.

Charge icon not visible
If the battery has been discharged

fully the charge icon is not

immediately visible when the

charger is plugged in. It will appear

after up to 2 hours. In this case the

battery is fully charged after 3-4

hours.
Please only use the power supply unit

provided!
Display while in service
Charge level display during

operation (empty-full):

A beep sounds when the battery is

nearly empty. The charge level of the

battery is only displayed correctly

after an uninterrupted charging/

discharging cycle. You should

therefore not remove the battery

unnecessarily

and where possible not

finish the charging process early

.

Operating time
A full battery will deliver up to

140 hours of standby time or

270 minutes of talktime (p. 75).

o

n

o

Additional information
The charger heats up when used for long

periods. This is normal and not dangerous.

Advertising