Siemens ST55 - Manual (Page 16)

Calling
15
ST55 en retail, A31008-H6850-A101-1-7619 (8. August 2003, 14:18)
©
Siem
ens AG 2001
, I
:\Mob
il\ST5
5\ST5
5_retail\en\_v
on_ok\ST55_p
hone.f
m
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Enter number (always with
area code, if necessary
with international dialling
code).
§Clear§ A short press clears the last
digit, a long press clears the
entire phone number.
B
Press Call key. The
displayed phone number is
dialled.
End call
A
Press the End key briefly.
The call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
Set volume
I
Use the joystick (top/
bottom) to adjust the
volume (only possible
during conversation).
Redial previous numbers
To redial the phone number last
called:
B
Press the Call key twice.
To redial other numbers that were
dialled previously:
B
Press the Call key once.
I
Pick out the required
phone number from the
list, then press the ...
B
... key.
Additional information
§Save§ Save phone number in contacts/
to SIM card...............................p. 23/p. 25
§Menu§ Call menu............................. p. 19
Microphone off .................................. p. 19
Auto key lock..................................... p. 52
Control codes (DTMF) ...................... p. 19
Voice dialing...................................... p. 66
International dialling codes
In standby mode:
0
Hold down until a “+” is
displayed.
§+List§ Press and select country.
Phone number memo
You can use the keypad to enter a phone
number during a conversation. The person
to whom you are speaking can hear these
entries. When the connection has ended
you can save or dial the phone number.