Siemens ST55 - Manual (Page 61)

Closed user group
60
ST55 en retail, A31008-H6850-A101-1-7619 (8. August 2003, 14:18)
©
Siem
ens AG 2001
, I
:\Mob
il\ST5
5\ST5
5_re
tail\en\_v
on_ok\ST55_closeduse
rgroup.fm
Closed user
group
C
M Call register
M Closed user group
M Select a function.
Depending on service provider,
you can create groups with this
service. These can have access to
internal (company) information, for
example, or special tariffs apply.
Please check with your service
provider for details.
Closed user group
Activate/deactivate function. Closed
user group must be deactivated for
normal phone use (phone code,
p. 13).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outg. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network
configuration).
L