Maxtor 773W V1.0 User Manual
Page 33
Advertising
Step4 : Router setting
NOTE : In the router setting, we have four steps as follows.
1. Dial setting
2. DHCP setting
3. Virtual server setting
4. DDNS setting
2. Press “LOCAL PORT” and set “Start IP address” and “Number of IP address”.
(For example,
if the IP address of DVR is 192.168.1.10,then 10 is excluded from the setting range
) Press
save after you finish setting up.
30
1.Press “INTERNER PORT” and choose your WAN type (e.q. PPPoE), and then enter
your “User Name” and “Password” of dialing up to dynamic IP. Press save after
you finish the set up.
test
Advertising