Maxtor 773W V1.0 - Manual (Page 36)

2. Click twice and enter your User name, Password and host (Note : If you never change the “Account”
before, the User Name and Password are both “admin”). Then click OK to connect.)
Step7 : Connect to DVR via internet
1. Change PC network setting to the original setting and link PC to the internet.
33
DDNS HOST
Note of Dynamic IP setting
*In step 2.7 : Some routers don’t support some DDNS HOST.
*In step 3.1 : Please use router’s LAN end to connect PC.
*In step 3.8 : Please use IE browser to enter router’s gateway.
*In step 4.1 : Please make sure that you have pressed save after you finish setting.
*In step 4.2 : Please make sure that you have pressed save after you finish setting.
*In step 4.3 : Please make sure that you have pressed add after you finish setting.
*In step 4.4 : Please make sure that you have pressed save after you finish setting.
*In step 6 : Please use router’s LAN end to connect to DVR. Use WAN end to connect to ADSL modem.
*In step 7 : The Server IP is the DDNS HOST which you set in step 4.4.