Maxtor 773W V1.0 - Manual (Page 49)

46
HDD HOT SWAP FUNCTION
Please follow the steps as following to ensure the reliability.
1)Unlock the cabinet by turning the key anti-clockwise.
2)Key in your password and press enter to disable the hard drive.
3)Pull out the HDD cartridge.
4)Replace the HDD in the tray.
Note: After turning the key to unlocked position, please wait for several seconds till HDD
operation stops completely.
Remove the HDD from
Cartridge Step 4 Loosen all screws on
the Cartridge
Note: 1. If you want to change a different HDD, you must remove the connectors from HDD ( refer to Page 51 ).
2. When HDD works for a period of time, the surface temperature will be high, please pay attention to it.
3. After turning the key to unlock position, please wait for several seconds until HDD operation stops
completely.
Step 1 Open the cap Step 2 Unlock the cabinet by turning
the key anti-clockwise
Step 5
Step 3 Pull out the cartridge
APPENDIX #2 – REPLACE THE HDD
A ( locked )
B ( unlocked )