MITSUBISHI ELECTRIC Mitsubishi Electric 3D Starter Pack 3DC-1000 - Manual (Page 10)

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.
10
Cleaning Instructions
• To avoid scratching the glasses, use only standard glasses lens
cleaning cloth, microfiber cloth, or a soft non-scratching cloth such
as cotton flannel. Make sure the cloth is clean and free of any
foreign material that may scratch the glasses.
• Cloths pre-moistened with cleaning solutions designed specifi-
cally for eye glasses can be used, however, do not spray solutions
directly on the glasses.
• DO NOT spray any cleaner directly onto the any surface of the
glasses. This may result in fire, electric shock, damage to the
product surface, or removal of control labels.
• DO NOT use chemicals containing alcohol, solvents, surfactants,
wax, benzene, thinners, insect repellents, lubricants, or household
cleaners. These may result in discoloration, removal of control
labels, or cracks to the product surfaces.
Caution
• Do not place the product in a location exposed to direct sunlight,
heat, fire, or water. This may result in product malfunction or fire.
• Do not apply force to the lenses of the 3D glasses. Do not drop or
bend the product. This may result in product malfunction.
Troubleshooting
If you encounter . . . Try this . . .
My 3D glasses do
not operate • Replace the battery if it is drained.
• Focus your 3D glasses toward the TV front.
Make sure that the distance from the TV to
the glasses is less than 20 feet in a straight
line.
• Check if the emitter LED is lit. If not, make
sure the TV’s 3D mode is turned on and the
emitter is plugged in.
The LED blinks
continually. The battery is drained. Replace it with a new
one.