MITSUBISHI ELECTRIC Mitsubishi Electric 3D Starter Pack 3DC-1000 - Manual (Page 3)

For assistance call 1(800) 332-2119
3
This apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Cet appareil ne doit pas être exposé à des gouttes ou à des éclaboussures et
aucun objet rempli d’un liquide, comme un vase, ne doit être placé sur l’appareil.
WARNING. To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Note: Features and specifications described in this owner’s guide are
subject to change without notice.
• Mitsubishi 738 and 838 series televisions:
- Mitsubishi 738 and 838 series televisions loaded with software
version 12.06 or higher may not require use of the adapter.
These models do require the adapter, however, to display 3D
from sources not outputting HDMI 1.4a mandatory formats.
- Mitsubishi 738 and 838 series televisions that are not loaded
with software version 012.06 or higher require the use of an
adapter until the firmware is updated in order to display 3D
sources that output HDMI 1.4a mandatory formats. Please visit
www.mitsubishi-tv.com/3Dupgrade for more information.
• All other 3D-ready Mitsubishi TV models. In all cases, all other
3D-ready TV models require use of the adapter for all HDMI 1.4a
mandatory formats.
• 3D Glasses. For all models, Active Shutter 3D Glasses with match-
ing synchronization emitter or DLP Link Active Shutter 3D glasses
are required in order to view 3D content.
The Mitsubishi 3D Adapter, Model 3DC-1000, may be used to display
3D content only when connected to a Mitsubishi 3D Ready TV or a
Mitsubishi 3D TV. A 3D source device coupled with the Mitsubishi 3D
Adapter is required to support display of 3D games, 3D broadcasts
from terrestrial/cable/satellite and 3D Blu-ray disc content.
Notes on 3D video and TV compatibility