Miele G 879 SCVI - Manual (Page 69)

The protective outer cover must not
be damaged in any way.
Connect the inlet hose wth the
“Waterproof” system vertically, use
angle connector if necessary.
There must be a distance of at least
20 cm between the floor and the bot-
tom of the “Waterproof” unit housing.
Lay the hose in such a way that it
does not rise above the bottom of
the “Waterproof” unit casing.
Warning: Electrical wiring and
components must not
contact any plumbing
material or drain hose.
Plumbing
69