MicroNet Technology VOIP FXO SP5054A/S - Manual (Page 41)

40
-add add a new record to phone book. When adding a record, users
have to specify name, ip, and e164 number to complete the
command.
-search search a record in phone book. The searching criteria can be
name, ip, or e164.
-delete delete a specific record. “pbook –delete 3” means delete index 3
record.
-insert add a new record and force to assign a specific index number for
it.
-modify modify an existing record. When using this command, users have
to specify the record’s index number, and then make the change.
Phonebook Rules:
To meet the requirements of communicating with trunk Gateway or
other applications, Phonebook has following characteristics to be
noticed.
When the destination side is a terminal, for ex: IP Phone or soft
phone, e164 number stands for exact destination phone number.
When the destination side is a Gateway, for ex: T1/E1 Gateway,
e164 phone number stands only for Gateway prefix. That is to say,
users have to continue to dial destination number, following the
prefix number. A example is as below:
A
Æ Micronet FXO Gateway
In Phonebook, there’s a record:
Index Name IP E164
1 B_Gateway 192.168.1.2 0
B Æ E1 trunk Gateway, which connects to PSTN with E1 PRI.
If users want to make a call to PSTN number “82265699”, they
have to pickup one of the phone connected to Micronet FXO
Gateway, and then dial “082265699”. After receiving the complete
dialed number, Micronet FXO Gateway will search for its Phone
Book, find “0” as matched prefix, and then dial out to B’s IP
address directly with destination e.164 (phone number)