MicroNet Technology VOIP FXO SP5054A/S User Manual
Page 8
7
z
Peer-2-Peer: It only supports the peer-to-peer mode and
users have to define the phone book for this mode.
z
Proxy: Users have to register on the Proxy if users picked up
this option.
z
Gateway: Only user line1 has to register on the Proxy, then
the line1, line2, line3 and line4 join in the same hunting group
automatically.
z
Primary Proxy IP Address: Enter the proxy ip if users pick up the
proxy mode.
z
Primary Proxy port: Set Proxy port for SP5050 series to send
message, default value is 5060, if there is no special request of
Proxy server, please don’t change this value.
z
Secondary Proxy IP Address: Set secondary Proxy IP Address or
URL address (Domain Name Server must be configured. Please
refer to Network Interface). When SP5050 series fail to register to
primary Proxy, it will try to register to secondary Proxy, when it fails
again, it will retry to register to Primary Proxy.
z
Secondary Proxy port: Set the secondary proxy port for every SIP
message, default value is 5060.
z
Outbound Proxy: This version could support the outbound proxy.
Users could define the ip address or domain name in this table.
z
Outbound Proxy port: Set outbound Proxy port for SP5050 series to
send message, default value is 5060, if there is no special request of
Proxy server, please don’t change this value.
z
Prefix String: Users could define this if the registration name was a
phonetic alphabet not the numbers.
z
Line 1 Number: The phone number of the Line 1.
z
Line 2 Number: The phone number of the Line 2.
z
Line 3 Number: The phone number of the Line 3.
z
Line 4 Number: The phone number of the Line 4.
z
SIP port: Users could change the sip port of this unit for the
registration.
z
RTP port: Users could change the beginning RTP ports in this table.
z
Expire: Users could change the expire time for the register message
sending.