6 voice setting (for advanced user) – MicroNet Technology VOIP FXO SP5054A/S User Manual
Page 11
10
Parameter Description:
z
Keypad Type: Select different DTMF Keypad Type
z
In-Band: The DTMF signal sending by RTP.
z
RFC2833: RTP Payload for DTMF Digits
z
INFO: The DTMF signal sending by SIP INFO.
z
Inter Digit Time: Set the DTMF inter-digit time (second). Parameter
defines the maximum amount of time between digits. If a digit is not
followed by another within this time limit, then digit collection is
terminated.
z
Ring Time: It for the ring detection from the PSTN. The ring detection
will be failed if users configure it too long.
z
Ring Before Answer: Decide how many rings the gateway will pick
up the call from FXO ports.
z
Flash time: Set the detective flash range in ms.
z
End of Dial: Press # key after numbers dialed.
1.6 Voice Setting (For Advanced User)
Users could configure the voice codec or gain level in this web page.
Please get more detail info from the following description.