MicroNet Technology VOIP FXO SP5054A/S - Manual (Page 31)

30
---------------------------------------------------------------
No Responsed
---------------------------------------------------------------
usr/config$ ping 192.168.0.20
PING 192.168.0.20: 56 data bytes
no answer from 192.168.0.20
---------------------------------------------------------------
2.10 [sysconf]
This command displays the system information and configuration.
---------------------------------------------------------------
usr/config$ sysconf
sysconf [-idtime digit][-keypad dtmf]
[-rba digit][-eod digit][-bl digit]
[-localrbt digit]
[-ring on_time off_time]
sysconf -print
-print Display system overall information and configuration.
-idtime Inter-Digits time.(1~10 sec)
-keypad Select DTMF type: 0=In-band,
1=RFC2833.
-callerid CallerId Type .(Caller type, 0: none, 1: FSK, 2: ETSI)
- dtrmfstart DTMF CallerID Start Symbol
-dtmaend DTMF CallerID End Symbol
-ring The ring time for ring detection.(Uint:ms)
-delay The FXO dial DTMF delay.(1~9)(Uint:s)
-rba the number of ring times before answer.(1~5)
-eod End of dial.(Enable:1 / Disable:0)
-connect Auto connect time.(0=Disable, for 1~65535 sec)
-onhook Auto ON-HOOK if detect reverse.(Enable:1 / Disable:0)
-billing Billing.(0=none,
1=reverse, 2=billing tone)
-Int
General IVR in FXO.(Enable:1 / Disable:0)
-silence Silence Detection.(0=Disable, 1=Enable)
-ivr General IVR in FXO.(Enable:1 / Disable:0)