MicroNet Technology VOIP FXO SP5054A/S - Manual (Page 39)

38
Gateway will drop prefix number on incoming call.
insert set which digit to insert on incoming call.
2.16 [pause]
Pause function allows users define a prefix for FXO, it usually apply to
one-stage-dialing. For example, the FXO port is connect to a PBX, when an
incoming call from IP side, users will hear a dial tone from PBX. If they want
to dial to a PSTN, they must press a special code and wait 1~2 seconds for
the PSTN dial tone. But in one-stage-dialing application, the FXO will not
wait for the dial tone and it will dial immediately. Now user can define a
special prefix, so if FXO detect the prefix, it will wait a moment then keep
dialing.
---------------------------------------------------------------
usr/config$ pause
Prefix drop/insert information and configuration
Usage:
pause -add [prefix number][delay number]
pause -delete index
pause -modify index [prefix number][drop number][insert number]
pause -print Prefix drop/insert information.
prefix The prefix of dialed number.
delay delay time(second).
Example:
pause -add prefix 100 delay 1
pause -delete 1
pause -modify 1 prefix 101 delay 0
---------------------------------------------------------------
Parameter Usages:
-add add a new record to pause function. When adding a
record, users have to specify prefix and delay seconds to
complete the command.
-delete delete a record to pause function.
-print print out current contents of Pause function.