MicroNet Technology VOIP FXO SP5054A/S - Manual (Page 42)

41
“82265699”. Pleased be noted that “0” is eliminated from Micronet
FXO Gateway itself.
Note:
1. Because of above characteristics, users have to take care of
the number plan very well to avoid the numbering conflict. If
users already defined “0” for specific trunk Gateway, other
terminal started with “0” shall be avoided, or the number will
be routed to the trunk Gateway defined “0”.
2. If user wants to set 2 sets of similar e164 such as 123 and
1234, please be careful configure 123 first, or it may cause
problem when user dial 1234, Micronet FXO Gateway may
dials out IP address of 123.
3.
(1) If called party is FXO product, please set e164 of pbook as
e.164 of called party, and remember to set sysconf –drule
in_drop “e.164”(refer to 5.12.)in called party.
(2) If called party is FXS product, please set e164 of pbook as
prefix of called party, when dialing to different line of FXS
product, please dial line number.
2.18 [voice]
The voice command is associated with the audio setting information. There
are four voice codecs supported by Micronet SP5052A/S / SP5054A/S
Gateway.
---------------------------------------------------------------
usr/config$ voice
Voice codec setting information and configuration
Usage:
voice [-send [G723 ms] [G729 ms] [G729A ms] [G729B ms] [G729AB ms] [G711U ms]
[G711A ms] ]
[-volume line [voice level] [input level] [dtmf level]]