2 sip config – MicroNet Technology VOIP FXO SP5054A/S User Manual
Page 7
6
connection.
z
PPPoE IP Address: In the PPPoE mode, this table will show the ip
address that this unit gets from the ISP.
z
PPPoE Destination: In the PPPoE mode, this table will show the
default gateway address that this unit gets from the ISP.
z
PPPoE DNS primary: In the PPPoE mode, this table will show the
DNS ip address that this unit gets from the ISP.
z
After Remote Host Disconnection: This unit will reboot and
re-connect to the ISP
1.2 SIP Config
This WEB page will help user to configure the information about the dial
mode, GK information and some TCP/IP port for the communication.
Please get more info about this configuration from the below detail
descriptions. (See figure 3.5)
Parameter Description:
z
Mode – Pick up the calling mode for this gateway.