Motorola USBW 100 - Manual (Page 16)

Establishing WiMAX Connections
Establishing WiMAX Connections
How to Connect to a WiMAX Network
To connect to a WiMAX network, follow these steps:
1. Navigate to the WiMAX Main Window in the Motorola Connection
Manager software by clicking the WiMAX button on the right side of
the main window.
2. If there are WiMAX networks available for connection, The Motorola
Connection Manager will display the name of one of the detected
networks as well as the total number of networks detected.
3. To connect the network whose name is displayed, click Connect .
To view information about a WiMAX network you are currently connected
to or the WiMAX device you are using to connect to that network, select
WiMAX Info from the Tools menu. This produces a window with two tabs.
• The Network tab contains information about the IP Settings for and the
amount Activity on your current WiMAX connection.
• The Device tab contains information about your current WiMAX Device.
WiMAX Device Information
This tab contains information about the WIMAX device you are currently
using. Fields include the following:
MAC Address
The hardware address of the device.
Firmware Version
The version of the device's on-board operating software.
Baseband Chip
The WiMAX chipset for the device.
USBw 100
MAR 2009 11