Motorola USBW 100 - Manual (Page 33)

Virtual Private Network (VPNs)
6. Check the Auto Launch box in the VPN section.
7. Click OK to exit the window.
8. Repeat steps 3 through 7 for any additional profiles that you want to
auto-launch your VPN connection with.
Configuring a VPN Connection
Follow these steps to configure a VPN connection:
1. Consult the administrator of the VPN you wish to access. The
administrator will provide you with VPN client software and
instructions for establishing VPN connections using that software.
2. If the VPN client software is not already installed on your system,
install it now. (Microsoft's VPN client is pre-installed on most versions
of Windows).
3. Open the Motorola Connection Manager software.
4. Access the VPN settings tab by selecting the Settings option from the
Tools drop-down menu and then clicking the 'VPN' tab.
5. If the VPN client software you are using is supported by the Motorola
Connection Manager and you want to manually specify your
connection information, select
Define VPN login info and then enter
the VPN profile information in the provided fields.
6. If the VPN client software you are using is supported by the Motorola
Connection Manager and you already have a connection profile
configured for that VPN client, select
Use existing VPN profile . Then,
specify the client software and the login profile that you want to use.
7. If the VPN client software you are using is NOT supported by the
Motorola Connection Manager, select Use third party VPN client .
Then, click the Browse button to specify the location of the client
software that you are using.
8. Click OK to exit the Settings window.
USBw 100
28 MAR 2009