Motorola USBW 100 - Manual (Page 47)

The Motorola Connection Manager Settings
Settings: Application
The Application tab contains general settings for the Motorola Connection
Manager.
User interface is always on top
The Motorola Connection Manager will always appear on top of other
application windows.
Enable splash screen
The Motorola Connection Manager will display a splash screen while it
loads. If you don't want the splash screen to be displayed, remove the
check mark from this box.
Automatically run this application...
The Motorola Connection Manager will be automatically launched each
time you start Windows.
Display connection timer
This box controls whether the connection timer will be displayed in the
main window. When the box is checked (default), the timer will be
displayed. When the box is unchecked, the timer will not appear.
Reset all warning messages
The Motorola Connection Manager provides various warning messages
that can be disabled if you do not want to see them. For example, the
connection software will warn you that you will lose network connectivity
if you close the application. These warning dialogs provide you with a
method to turn off the warning. You can turn these warning messages back
on by pressing the
Reset button.
The list of applications on this tab will be automatically launched when
connections are established with particular network profiles. In addition to
adding and removing applications from this list, you can specify their
launch options and how the Motorola Connection Manager should respond
if one of these applications is shut down.
USBw 100
42 MAR 2009