Mitsumi electronic Untitle LDT37Iv - Manual (Page 20)

English-18
1. Pressing the Main Power Switch.
NOTE: When the Main Power Switch is used to power off
the LCD monitor, the remote control and the power
button will not activate the on mode and both
green and red power indicator turn off. Be sure to
turn the Main Power Switch to the on mode before
using these two options.
2. Pressing the power button.
NOTE: Before pressing the power button, be sure to turn
on the Main Power button on the LCD monitor.
3. Using the remote control
NOTE: Before operating the remote control, be sure to
turn on the Main Power Switch on the LCD monitor.
The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the
following three options:
Power Button
Main Power Switch
Power ON and OFF Modes
Basic Operation