Memorex MLT1912 - Manual (Page 19)

18
SETTING THE MENU (CONTINUED)
Press the STANDBY button to turn on the TV; the
STANDBY indicator will turn off.
Press the SOURCE button 1 to select TV (NTSC or
ATSC). Select a channel to add or delete using the Number
buttons 2. Press the MENU button 3; the Main Menu
screen will appear.
Select Setup using the CHANNEL/Navigation UP 1 or
DOWN 2 button, then press the VOLUME UP/Navigation
Right button 3 to select it. Select Preset using the
CHANNEL/Navigation UP 1 or DOWN 2 button, then
press the VOLUME UP/Navigation Right button 3 to
select it.
3
Select Skip using the CHANNEL/Navigation UP 1 or
DOWN 2 button, then press the VOLUME UP/Navigation
Right button 3 to select it. Select Skip Off to add the
channel or Skip On to skip the channel (when using the
channel buttons) using the CHANNEL/Navigation UP 1 or
DOWN 2 button, then press the VOLUME UP/Navigation
Right button 3 to select it.
4
Press the MENU button repeatedly when finished or wait
approx. 10 seconds to exit the menus.
5
2 1
ADDING/DELETING CHANNELS
NOTES:
• If no buttons are pressed for approx. 10 seconds, the
menu will disappear automatically.
• When Skip On is set for a channel, you cannot select it
using the CHANNEL/Navigation UP or DOWN buttons.
You must use the Number buttons to select the channel.
If you would like to use the CHANNEL/Navigation UP or
DOWN buttons to select this channel, set the channel to
Skip Off.
3
1
2
3
1
2