MACKIE ONYX 1640I - Manual (Page 34)

34 Onyx 1640i
Appendix D: Rotopod Instructions
The Pod section of the Onyx 1640i mixer can be fi tted in three different orientations to suit your preference:
1. From the factory, the Pod section has the input and output connections at the rear of the mixer. If you rack
mount it, this will take up 16 rack spaces. (Allow one or two extra spaces for making your connections.)
2. The Pod can be fi tted on the back of the mixer, with the connections pointing out the back. This will take
up 12 rack spaces. (Allow one or two extra spaces for making your connections.) Details follow on how to
change to this confi guration.
3. Using an optional bracket, it may also be fi tted so that the connections face the same direction as the
console side. This will take up 17 rack spaces. If you would like to order the bracket, please contact your
Mackie dealer or the Mackie Parts Department. Details follow on how to change to this confi guration.