MACKIE ONYX 1640I - Manual (Page 41)

Owner's Manual 41
7. This step is optional. Remove the 14 screws from the two side trim pieces. Screw the rack ears to the mixer
where the side trim pieces used to reside. You will only use eight screws (four on each side) for the rack
ears. The trim pieces and remaining screws should be stored away for safekeeping.
8. This step does not exist. You have completly front-mounted the Onyx 1640i Pod section. There is nothing
else left to say about it, no more instructions. The thought of an almost nearly blank page is utterly
intolerable, though. And this is included for a step that is only optional, not mandatory. Oh, the humanity.
So these words are here to try and somewhat fi ll the gap, but it is looking like it could be diffi cult to keep
writing about nothing to fi ll up space.
9. Ok, you are still here, even after what is written above. We should probably stop while we’re ahead because
it seems to be that the keyboard is slowly running out of ink.