Initio INI-9100UW - Manual (Page 104)

11-8
Removing the Initio driver from a UnixWare system
1. Once a UnixWare session is established and a command prompt is ready,
type (recall that UnixWare is case sensitive):
•
Type: /etc/conf/bin/idinstall -d i910u <ENTER> to delete the
following files:
/etc/conf/mdevice.d/i910u
/etc/conf/sdevice.d/i910u
/etc/conf/pack.d/i910u/driver.o
/etc/conf/pack.d/i910u/space.c
/etc/conf/pack.d/i910u/disk.cfg
2. Then rebuild the UnixWare kernel by executing the following commands
at the system prompt:
• •
/etc/conf/bin/idbiuld -B -K <ENTER>
• •
/cp /etc/conf/cf.d/unix /stand/unix <ENTER>
• •
cd/ <ENTER>
• •
shutdown -g0 (where 0 is Zero) <ENTER>
• •
Y <ENTER>