Initio INI-9100UW - Manual (Page 92)

10-4
figure 10-2 Linking a package in SCO UNIX
3. Type: i91u < ENTER >. The system at this point will boot into SCO
UNIX. Please refer to the SCO UNIX documentation for additional
information. When prompted by the following screen (see figure 10-
3), insert the INITIO INI-9100U/9100UW DRIVER DISK 2 diskette
into your floppy drive; Press < ENTER >
figure 10-3 Insert Initio INI-9100U/9100UW Driver Disk 2