Infinite Peripherals KPM-210 - Manual (Page 22)

1. INSTALLATION AND USE
KPM210/216 10 1-
Clean the heating line (black line
indicated by the arrow)
moistened with denatured alcohol (see fig. 1.10)
4) Return the printing head to its original position, being careful to insert the
fastening pins (1) in their slots (see fig. 1.11) and to not damage the head
cable
(6) (7) .
5) Lower the paper guide (2) as shown in fig. 1.11.
(6) N.B.: Make sure the head cable is not crushed and that it does
not obstruct the paper path.
(7) N.B.: Make sure the head cable connector remains attached.
(Fig.1.10)
(Tab.A.3)
www.ipcprint.com