Infinite Peripherals KPM-210 User Manual
Page 39
3. PRINTER FUNCTIONS
KPM210/216
12
3-
[Notes]
• The character spacing is added on right of each character.
• The right character spacing for double-width mode is twice
the normal value.
When the characters are enlarged, the right side character
spacing is m (2 or 4) times the normal value.
• The horizontal and vertical motion units are specified by GS
P. Changing the horizontal or vertical motion units does not
affect the current right side spacing.
• The GS P command can change the horizontal (and verti-
cal) motion unit. However, the value cannot be less than the
minimum horizontal movement amount.
• In standard mode, the horizontal motion unit is used.
• The maximum right side spacing is:
255/204 inches for the 204 dpi model
255/300 inches for the 300 dpi model.
[Default]
n = 0
[Reference]
GS P or GS $D0
[Example]
n
!
C
S
E
n
!
C
S
E
n
!
C
S
E
n
!
C
S
E
n
!
C
S
E
[Name]
Select print modes
[Format]
ASCII
ESC !
n
Hex
1B
21
n
Decimal
27
33
n
[Range]
0
≤
n
≤
255
[Description]
Selects print modes using n (see table below):
(Tab.A.3)
www.ipcprint.com