Infinite Peripherals KPM-210 User Manual
Page 51
3. PRINTER FUNCTIONS
KPM210/216
24
3-
[Notes]
• The horizontal tab position is stored as a value of [character
width x n] measured from the beginning of the line. The char-
acter width includes the right-side character spacing and
double-width characters are set with twice the width of normal
characters.
• This command cancels previous tab settings.
• When setting n = 8, the print position is moved to column 9,
by sending HT.
• Up to 32 tab positions can be set. Data exceeding 32 tab
positions is processed as normal data.
• Send [ n ] k in ascending order and place a 0 NUL code at
the end. When [ n ] k is less than or equal to the preceding
value [ n ] k-1, the setting is complete and the data which
follows is processed as normal data.
• ESC D NUL cancels all horizontal tab positions.
• The previously specified horizontal tab position does not
change, even if the character width is modified.
[Default]
Default tab positions are set at intervals of 8 characters (col-
umns 9, 17, 25, …) when the right-side character spacing is
0.
[Reference]
HT
[Example]
n
E
C
S
E
n
E
C
S
E
n
E
C
S
E
n
E
C
S
E
n
E
C
S
E
[Name]
Turn emphasized mode on/off
[Format]
ASCII
ESCE
n
Hex
1B
45 n
Decimal
27
69 n
[Range]
0
≤
n
≤
255
[Description]
Turns emphasized mode on/off.
• When the LSB of n is 0, the emphasized mode is off.
• When the LSB of n is 1, the emphasized mode is on.
[Notes]
• Only the LSB of n is effective.
• ESC ! also turns on and off the emphasized mode. How-
ever, the last received command is the effective one.
[Default]
n = 0
[Reference]
ESC !
[Example]
(Tab.A.3)
www.ipcprint.com