Intel Express 100BASE-T4 - Manual (Page 18)

16
C H A P T E R 3 Intel Express 100BASE-T4 Stackable Hub
You can connect the following 100 Mbps devices to the ports on the
Express Stackable Hub and optional uplink modules:
• Workstations
• Servers
• Printers
• Transceivers
• Switching hubs
• Routers
• Printers
• Print servers
See “Using a switch to connect hubs” later in this chapter for
information about connecting to 100 Mbps switching hubs. For
information about making connections to other 100BASE-T4 devices,
refer to the documentation that shipped with the device.
Checking the LEDs
When you connect the power cord to the Express 100BASE-T4
Stackable Hub, the hub performs a confidence test. During this test, the
hub’s Stat LED lights amber to indicate the test is in progress.
When the confidence test successfully completes, the LEDs on the
hub’s front panel should appear as follows:
• The Pwr LED lights green, indicating the hub is receiving power.
• The Stat LED lights green, indicating the hub passed the
confidence test and is operating normally.