Intel 410 User Manual
Page 52
Advertising
Chapter 4. Completing Your Configuration Setup Under Windows NT
4–8
EK–SMRAC–IG. C01
7. You now need to reboot your system for changes made thus far to be recognized by
Windows NT.
8. After rebooting, you need to perform the steps listed at the beginning of this chapter,
Section 4.1.1, Completing a New RAID Array Configuration, in order for the changes to
take effect.
9. After completing the steps described in Section 4.1.1, Completing a New RAID Array
Configuration, you are done.
Advertising