InFocus LP 250 - Manual (Page 10)

10
Connecting a video device
Standard video connections
Plug the audio/video (A/V) cable’s yellow connector into the video-out
connector on your video device. Plug the other yellow connector into the
yellow Video connector on the projector.
Plug the white connector into the left audio out connector on your video
device; plug the red connector into the right audio out connector on the
video device. Plug the blue connector into the Audio In connector on the
projector.
Connect the power cord to the connector on the back of the projector and to
your electrical outlet.
The Power LED on the keypad lights green.
NOTE : Always use the power cord that shipped with the projector.
Optional video connections
If your video device uses a round, four-prong S-video connector, plug an S-
video cable, sold separately, into the S-video connector on your video
device and into the S-video connector on the projector. Use the A/V cables
audio connectors as described above (the yellow connectors on the A/V
cable are not used).
connect A/V cable
connect power cable
connect S-video and A/V cables
p5p7 manual.fm Page 10 Thursday, January 9, 2003 9:46 AM