InFocus LP 250 - Manual (Page 26)

26
Picture menu
To adjust the following five settings, highlight the setting, press Select, use
the up and down arrows to adjust the values, then press Select to confirm
the changes.
Keystone : adjusts the image vertically and makes a squarer image. You can
also adjust keystone from the keypad.
Contrast : controls the degree of difference between the lightest and darkest
parts of the picture and changes the amount of black and white in the
image.
Brightness : changes the intensity of the image.
Color : adjusts a video image from black and white to fully saturated color.
NOTE : The color setting applies to video sources only. The tint setting
applies to NTSC video sources only.
Tint : adjusts the red-green color balance in the image of NTSC video
images.
Aspect Ratio : Aspect ratio is the ratio of the image width to image height.
TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs are
1.78:1, or 16:9. The default is 4:3.
Select Native to see the unmodified input with no resizing by the projector.
Select 16:9 to watch enhanced widescreen DVDs.
Picture menu
increasing keystone
decreasing keystone
Aspect ratio
p5p7 manual.fm Page 26 Thursday, January 9, 2003 9:46 AM